2539_i_2539_i_base_compounds_400RediBase™ is suitable for base coating plasterboard joints, angles and fastener heads when used in conjunction with Boral Plasterboard finishing compounds.
RediBase™ is recommended for use as the first and second coat in Boral three coat jointing system.


Each coat of RediBase™ compound must be allowed to dry thoroughly before applying the next coat.
The use of paper tape is recommended.
Can be applied with hand and mechanical tools.


The application of RediBase™ compound at interior temperatures less than 10deg.C is not recommended. Under cold or wet weather conditions, the use of plaster based compounds, such as BaseCote is recommended.
Application of plaster based setting compounds over premixed drying type compounds is not recommended.


Always use clean tools.
Do not mix with residues of previously used compounds. The inclusion of such materials will impair the performance of this product and will void the product warranty.
RediBase™ may appear thick in pail. Before adding water, lightly mix and test its application. If required, add water to achieve desired consistency. Caution: Avoid over-thinning when adding water as this may cause cracking and excessive shrinkage.
If liquid has separated from the compound, stir carefully to restore consistency. Caution: Do not overmix. Overmixing can introduce air bubbles, which can create surface imperfections.

 Click here for MSDS file

 Click here


         (07 )   4632 2659